0

A Novel Hybrid Mode of Sample Injection to Enhance CZE Sensitivity for Simultaneous Determination of a Pyridine-Triphenylborane Anti-Fouling Agent and Its Degradation Products

Netnapit Kaewchuay, Yuki Yakushiji, Keiichi Fukushi, Keiitsu Saito, Takeshi Hirokawa

Electrophoresis. 2011 Jun;32(12):1486-91.

PMID: 21563190

Abstract:

We developed a novel hybrid sample injection mode (HSIM) that presents the combination of electrokinetic injection and vacuum injection to enhance detection sensitivity in CZE. Samples were introduced using both vacuum and electrokinetic injections simultaneously, with a water plug injected into the capillary prior to sample introduction (i.e. similarly to field-amplified sample injection, FASI). Using a sample mixture containing an anti-fouling agent applied to ship hulls, pyridine-triphenylborane and its degradation products (diphenylborinic acid, phenylboronic acid, and phenol) dissolved in ACN, the length of water plug, time, and voltage for sample introduction were optimized. The signal intensity (peak height) was found to be up to a 30-fold increased using HSIM by applying 4 kV for 4 s at the inlet end of the capillary as the cathode with supplementary vacuum in comparison with only vacuum injection for 4 s. The LODs (at a S/N of 3) for pyridine-triphenylborane, diphenylborinic acid, phenylboronic acid, and phenol were 0.88, 1.0, 21, and 23 μg/L, respectively. At the level of 0.04 mg/L, the RSDs (n=4, intra-day) for the above analytes were in the ranges of 1.9-11, 4.3-9.2, and 0.34-0.66% for peak area, peak height, and migration time, respectively. The HSIM is a simple and promising procedure useful for enhancing the sensitivity for both low-and high-mobility ions in CZE.

Chemicals Related in the Paper:

Catalog Number Product Name Structure CAS Number Price
AP960714-B Triphenylborane Triphenylborane 960-71-4 Price
qrcode