0

Effect of SiO₂ Nanoparticles on the Performance of PVdF-HFP/Ionic Liquid Separator for Lithium-Ion Batteries

Stefano Caimi, Antoine Klaue, Hua Wu, Massimo Morbidelli

Nanomaterials (Basel). 2018 Nov 8;8(11):926.

PMID: 30413021

Abstract:

Safety concerns related to the use of potentially explosive, liquid organic electrolytes in commercial high-power lithium-ion batteries are constantly rising. One promising alternative is to use thermally stable ionic liquids (ILs) as conductive media, which are however, limited by low ionic conductivity at room temperature. This can be improved by adding fillers, such as silica or alumina nanoparticles (NPs), in the polymer matrix that hosts the IL. To maximize the effect of such NPs, they have to be uniformly dispersed in the matrix while keeping their size as small as possible. In this work, starting from a water dispersion of silica NPs, we present a novel method to incorporate silica NPs at the nanoscale level (<200 nm) into PVdF-HFP polymer clusters, which are then blended with the IL solution and hot-pressed to form separators suitable for battery applications. The effect of different amounts of silica in the polymer matrix on the ionic conductivity and cyclability of the separator is investigated. A membrane containing 10 wt.% of silica (with respect to the polymer) was shown to maximize the performance of the separator, with a room temperature ionic conductivity of of 1.22 mS cm - 1 . The assembled half-coin cell with LiFePO 4 and Li as the cathode and the anode exhibited a capacity retention of more than 80% at a current density of 2C and 60 ∘ C.

Chemicals Related in the Paper:

Catalog Number Product Name Structure CAS Number Price
LS761204 Silica, nanoparticle dispersion in water Silica, nanoparticle dispersion in water Price
qrcode