0

Inkjet-Printed Imbedded Graphene Nanoplatelet/Zinc Oxide Bulk Heterojunctions Nanocomposite Films for Ultraviolet Photodetection

Brent Cook, Maogang Gong, Alex Corbin, Dan Ewing, Ashley Tramble, Judy Wu

ACS Omega. 2019 Dec 18;4(27):22497-22503.

PMID: 31909332

Abstract:

A ZnO sol-gel precursor (ZnOPr) and graphene nanoplatelets (GnPs) are mixed into a composite ink for inkjet printing photodetectors with bulk heterojunctions of ZnO/GnP on a heated SiO2/Si substrate. Heating of the SiO2/Si wafers at ∼50 °C was found optimal to prevent segregated droplets on the hydrophobic surface of the SiO2/Si substrate during printing. After printing the ZnO/GnP channels, thermal annealing at 350 °C for 2 h was performed for crystallization of ZnO and formation of the ZnO/GnP heterojunctions. The GnP concentration was varied from 0, 5, 20, and 30 mM to evaluate optimal formation of the ZnO/GnP bulk heterojunction nanocomposites based on ultraviolet photoresponse performance. The best performance was observed at the 20 mM GnP concentration with the photoresponsivity reaching 2.2 A/W at an incident ultraviolet power of 2.2 μW and a 5 V bias. This photoresponsivity is an order of magnitude better than the previously reported counterparts, including 0.13 mA/W for dropcasted ZnO-graphite composites and much higher than 0.5 A/W for aerosol printed ZnO. The improved performance is attributed to the ZnO/GnP bulk heterojunctions with improved interfaces that enable efficient exciton dissociation and the charge transport. The developed inkjet printing of sol-gel composite inks approach can be scalable and low cost for practical applications.

Chemicals Related in the Paper:

Catalog Number Product Name Structure CAS Number Price
LS71443 Zinc oxide ink for inkjet printing Zinc oxide ink for inkjet printing Price
qrcode