CAS 9011-14-7 Poly(methyl methacrylate) - Analytical Products / Alfa Chemistry

CAT	AP9011147
CAS	9011-14-7
MDL Number	MFCD00134349

Linear Formula

[CH2C(CH3)(CO2CH3)]n

Cranioplasty With Poly-Methyl Methacrylate Resin

Xiomara Mónica Johanna Palacio Muñoz, João Paulo Bonardi, Leonardo de Freitas Silva, Erik Neiva Ribeiro de Carvalho Reis, Willian Ricardo Pires, André Luis da Silva Fabris, Francisley Ávila Souza, Idelmo Rangel Garcia Júnior

J Craniofac Surg. 2017 Jan;28(1):294-295.

PMID: 27906847

Ionic Liquid-Nanostructured Poly(Methyl Methacrylate)

Clarice Fedosse Zornio, Sébastien Livi, Jannick Duchet-Rumeau, Jean-François Gerard

Nanomaterials (Basel). 2019 Sep 26;9(10):1376.

PMID: 31561407

Surface Functionalization of an Aluminum Alloy to Generate an Antibiofilm Coating Based on Poly(Methyl Methacrylate) and Silver Nanoparticles

Lisa Muñoz, Laura Tamayo, Miguel Gulppi, Franco Rabagliati, Marcos Flores, Marcela Urzúa, Manuel Azócar, Jose H Zagal, María V Encinas, Xiaorong Zhou, George Thompson, Maritza Páez

Molecules. 2018 Oct 24;23(11):2747.

PMID: 30355974

The Effect of Poly(methyl Methacrylate) Surface Treatments on the Adhesion of Silicone-Based Resilient Denture Liners

Yuri Wanderley Cavalcanti, Martinna Mendonça Bertolini, Altair Antoninha Del Bel Cury, Wander José da Silva

J Prosthet Dent. 2014 Dec;112(6):1539-44.

PMID: 25258267

* Products or Services Interested: Poly(methyl methacrylate) (9011-14-7)
* Your question
* Name
* Email
Verification Code

CAT	Size	Form	Description	Price
AP9011147-1	25G	neat	analytical standard, for GPC, average Mw 97,000 (Typical), average Mn 46,000 (Typical)	Inquiry
AP9011147-2	500MG	neat	analytical standard, for GPC, 2,000	Inquiry
AP9011147-3	500MG	neat	analytical standard, for GPC, 10,000	Inquiry
AP9011147-4	500MG	neat	analytical standard, for GPC, 20,000	Inquiry
AP9011147-5	500MG	neat	analytical standard, for GPC, 50,000	Inquiry
AP9011147-6	500MG	neat	analytical standard, for GPC, 100,000	Inquiry
AP9011147-7	500MG	neat	analytical standard, for GPC, 8,000	Inquiry
AP9011147-8	500MG	neat	analytical standard, for GPC, 4,000	Inquiry
AP9011147-9	250MG		analytical standard, for GPC, 2,480,000	Inquiry
AP9011147-10	50G, 100G	powder	average Mw ~15,000 by GPC, powder	Inquiry

Case Study

Poly(methyl methacrylate) (PMMA) Passivation Strategy for Enhancing the Performance of 2D Dion-Jacobson Perovskite Films

Guan, Zihao, et al. Materials Today Physics 51 (2025): 101652.

In this study, Poly(methyl methacrylate) (PMMA) was employed as a passivation strategy to improve the structural quality and optoelectronic performance of 2D Dion-Jacobson (DJ) perovskite films, which are known for their potential in nonlinear photonic applications. Three n = 1 phase 2D DJ perovskites, namely (BDA)PbI4, (AMP)PbI4, and (PDMA)PbI4, were synthesized using a two-step spin-coating process. The precursor solution, containing PbI2 and corresponding organic diamine dihydroiodide (BDAI2, AMPI2, or PDMAI2), was dissolved in a mixed solvent of DMF and DMSO.
To mitigate defects at the grain boundaries and enhance charge transport, PMMA was introduced during the spin-coating process. The PMMA was added in varying concentrations (1, 2, and 4 mg mL^-1) and applied onto the perovskite films at the second spin-coating stage, followed by thermal annealing at 100 °C for 10 minutes.
The results indicate that the inclusion of PMMA significantly improved the crystal quality and reduced defects in the perovskite films, thus enhancing their nonlinear optical (NLO) absorption properties. This approach presents a promising strategy for optimizing the performance of perovskite materials, particularly in the context of photonic applications where structural stability and optoelectronic efficiency are crucial.

Poly(methyl methacrylate) (PMMA) Microcapsules for the Preparation of Photocatalytic Metal-Oxide Coatings

Forte, Marta A., et al. Thin Solid Films 807 (2024): 140552.

In this study, Poly(methyl methacrylate) (PMMA) microcapsules (PMMA-MCs) were utilized as a substrate for the development of photocatalytic metal-oxide thin films. The PMMA-MCs were synthesized using the solvent evaporation method in an oil-in-water emulsion (O/W). A 20% PMMA solution in chloroform was mixed with an aqueous phase containing 5% PVA and 3.3% SDS, forming microcapsules upon continuous stirring in a 40°C bath to ensure complete solvent evaporation. After filtration and rinsing, the PMMA-MCs were dried at room temperature.
For the photocatalytic application, the PMMA-MCs were coated with thin films of ZnO and TiO2 using a low-temperature atomic layer deposition (ALD) process at 100°C. This technique enabled the formation of a three-dimensional composite structure, with the PMMA-MC core remaining empty to optimize the photocatalytic efficiency of the metal-oxide layers. The PMMA-MC templates served as a robust foundation for the metal-oxide films, offering enhanced surface area and stability.
This approach illustrates the potential of PMMA-MCs in supporting functional coatings for advanced photocatalytic applications, offering a promising strategy for the development of efficient photocatalytic materials with enhanced performance.

Poly(methyl methacrylate) (PMMA) for the Preparation of ZnO Nanocomposites: Synthesis and Characterization

Lahariya, Vikas, Tamanna Sharma, and Shilpa Behl. Solid State Communications 397 (2025): 115823.

In this study, Poly(methyl methacrylate) (PMMA) was utilized as a matrix material to prepare ZnO nanocomposites aimed at enhancing the thermal stability and dielectric performance of the polymer. The ZnO nanoparticles were synthesized using a chemical precipitation method, where 4 mM zinc acetate and 20 mM KOH were mixed in an aqueous medium with 0.5 wt% soluble starch as a stabilizing agent. The ZnO nanoparticles were then characterized and used as nanofillers in the PMMA matrix.
To prepare the nanocomposites, different amounts (0%, 5%, 7%, 9%, and 11 wt%) of ZnO were added to a PMMA solution (0.2 g in 10 mL deionized water). The mixture was sonicated for 30 minutes to ensure uniform dispersion of the ZnO particles. After sonication, the solution was dropwise applied onto ultrasonically cleaned glass plates and Petri dishes, followed by drying in a vacuum oven at 60°C for 90 minutes with a heating rate of 10°C/min.
The thermal stability of the resulting PMMA-ZnO nanocomposites was evaluated using Thermogravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC), revealing significant improvements in the thermal degradation behavior, with enhanced stability up to 590°C compared to pure PMMA films. This approach demonstrates the potential of PMMA-ZnO composites in high-temperature applications.